642-813 Q&A – New Questions (26-30) (March, 2012)

Posted by admin on March 19, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 26
You are tasked with designing a security solution for your network. What information should be gathered prior to designing the solution?
A.    a list of applications currently in use in the network
B.    IP addressing design plans so that the network can be appropriately segmented to mitigate
potential network threats
C.    detailed security device specifications
D.    results from pilot network testing
Answer: A

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

642-813 Q&A – New Questions (21-25) (March, 2012)

Posted by admin on March 15, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 21
Which of the following will generate an RSTP topology change notification? (Select the best answer.)
A.    an edge port that transitions to the forwarding state
B.    a non-edge port that transitions to the blocking state
C.    a non-edge port that transitions to the forwarding state
D.    an edge port that transitions to the blocking state
E.    any port that transitions to the blocking state
F.    any port that transitions to the forwarding state
Answer: C

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

642-813 Q&A – New Questions (16-20) (March, 2012)

Posted by admin on March 13, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 16
Which optional feature of an Ethernet switch disables a port on a point-to-point link if the port does not receive traffic while Layer 1 status is up?
A.    BackboneFast
B.    UpLinkFast
C.    Loop Guard
D.    UDLD aggressive mode
E.    Fast Link Pulse bursts
F.    Link Control Word
Answer: D

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

642-813 Q&A – New Questions (11-15) (March, 2012)

Posted by admin on March 7, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 11
Which two statements are true about best practices in VLAN design? (Choose two.)
A.    Routing should occur at the access layer if voice VLANs are utilized. Otherwise, routing should
occur at the distribution layer.
B.    Routing may be performed at all layers but is most commonly done at the core and distribution layers.
C.    Routing should not be performed between VLANs located on separate switches.
D.    VLANs should be local to a switch.
E.    VLANs should be localized to a single switch unless voice VLANs are being utilized.
Answer: BD

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

642-813 Q&A – New Questions (6-10) (March, 2012)

Posted by admin on March 5, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 6
In the event that two devices need access to a common server, but they cannot communicate with each other, which security feature should be configured to mitigate attacks between these devices?
A.    port security
B.    dynamic ARP inspection
C.    DHCP snooping
D.    private VLANs
E.    BPDU guard
Answer: D

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

642-813 Q&A – New Questions (1-5) (March, 2012)

Posted by admin on March 3, 2012 None comments

Section 7 – New Questions (March, 2012)

QUESTION 1
Refer to the exhibit. If VLAN 21 does not exist before typing the commands, what is the result of the configuration applied on switch SW1?


A.    A new VLAN 21 is created and port 0/8 is assigned to that VLAN.
B.    A new VLAN 21 is created, but no ports are assigned to that VLAN.
C.    No VLAN 21 is created and no ports are assigned to that VLAN.
D.    Configuration command vlan database should be used first to create the VLAN 21
Answers: A

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

CCNP SWITCH(642-813) HotSpot – Super HSRP

Posted by admin on February 25, 2012 1 comments

Ferris Plastics,Inc. is a medium sized company, with enterprise network(access,distribution and core) switches that provide LAN connectivity from user PCs to corporate servers.The distribution switches are configured to use HSRP to provide a high availability solution as follows:

-DSW1(Distribution Switch 1)is the primary device for VLAN 101,VLAN 102 and VLAN 105.

-DSW2(Distribution Switch 2)is the primary device for VLAN 103 and VLAN 104.

-A failure of GigabitEthernet1/0/1 on the primary device should block the primary device from being the active device,unless GigabitEthernet1/0/1 on the backup device has also failed.

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

[OFFER] CBT Nuggets – CISCO CCNP SWITCH 642-813 Implementing Cisco IP Switched Networks Video (Torrent)

Posted by admin on February 17, 2012 3 comments

Employers know that CCNP certified job applicants have a real-world knowledge of networking.  They also know that Cisco awards big discounts to companies that hire Cisco certified staff.

After watching Jeremy Cioara’s new CCNP 642-813 SWITCH training you’ll be a master-level consultant on Cisco switched networks. You’ll also have brighter career prospects and be an important step closer to CCNP certification.

Sorry you have no rights to view this post!

[This content is only available for our VIP member]. Become VIP Member NOW

Page 1 of 151234510...Last »