Home » Microsoft » 70-410 Dumps » Pass Ensure 70-410 Exam By Training Lead2pass New Microsoft 70-410 VCE And PDF Dumps (141-150)

Pass Ensure 70-410 Exam By Training Lead2pass New Microsoft 70-410 VCE And PDF Dumps (141-150)

If you wish to pass 70-410 we highly recommend our demo. Lead2pass is the most credible and authentic source of information on all the available certification exams and we strive to keep our products up-to-date and reliable on a consistent basis.

QUESTION 141
Drag and Drop Question
You plan to deploy a DHCP server that will support four subnets.
The subnets will be configured as shown in the following table.

image_thumb[1]

You need to identify which network ID you should use for each subnet.
What should you identify? To answer, drag the appropriate network ID to the each subnet in the answer area.

 image_thumb[2]
Answer:

image_thumb[3]

QUESTION 142
Your network contains an Active Directory domain named adatum.com.
The domain contains a file server named Server2 that runs Windows Server 2012 R2. Server2 contains a shared folder named Home. Home contains the home folder of each user.
All users have the necessary permissions to access only their home folder.
A user named User1 opens the Home share as shown in the exhibit. (Click the Exhibit button.)

image_thumb[4]

You need to ensure that all users see only their own home folder when they access Home.
What should you do from Server2?

A.    From Windows Explorer, modify the properties of Home.
B.    From Server Manager, modify the properties of the volume that contains Home.
C.    From Windows Explorer, modify the properties of the volume that contains Home.
D.    From Server Manager, modify the properties of Home.

Answer: D

QUESTION 143
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)

image_thumb[5]

You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.)

image_thumb[6]

You need to install the Server Graphical Shell feature on Server1.
Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Index 1
B.    Index 2
C.    Index 3
D.    Index 4

Answer: BD
Explanation:
When you install Windows Server 2012 R2 you can choose between Server Core Installation and Server with a GUI. The "Server with a GUI" option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The "Server Core Installation" option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the "Server with a GUI" option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option. Reference: Windows Server Installation Options

QUESTION 144
Your network contains two subnets. The subnets are configured as shown in the following table.

image_thumb[7]

You have a server named Server1 that runs Windows Server 2012 R2.
Server1 is connected to LAN1.
You run the route print command as shown in the exhibit. (Click the Exhibit button.)

image_thumb[8]

You need to ensure that Server1 can communicate with the client computers on LAN2.
What should you do?

A.    Change the default gateway address.
B.    Set the state of the Teredo interface to disable.
C.    Change the metric of the 10.10.1.0 route.
D.    Set the state of the Microsoft ISATAP Adapter #2 interface to disable.

Answer: A

QUESTION 145
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a member server named Server1.
Server1 has the File Server server role installed.
On Server1, you create a share named Documents. The Documents share will contain the files and folders of all users.
You need to ensure that when the users connect to Documents, they only see the files to which they have access.
What should you do?

A.    Modify the NTFS permissions.
B.    Modify the Share permissions.
C.    Enable access-based enumeration.
D.    Configure Dynamic Access Control.

Answer: C

QUESTION 146
Your network contains an Active Directory domain named contoso.com.
You have a starter Group Policy object (GPO) named GPO1 that contains more than 100 settings.
You need to create a new starter GPO based on the settings in GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?

A.    Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
B.    Create a new starter GPO and manually configure the policy settings of the starter GPO.
C.    Right-click GPO1, and then click Back Up.
    Create a new starter GPO.
    Right-click the new GPO, and then click Restore from Backup.
D.    Right-click GPO1, and then click Copy.
    Right-click Starter GPOs, and then click Paste.

Answer: A

QUESTION 147
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named Server1.
Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.

image_thumb[11]

The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a FQDN.
You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?

A.    The 006 DNS Servers option to Subnet2
B.    The 015 DNS Domain Name option to Subnet1
C.    The 006 DNS Servers option to Subnet1
D.    The 015 DNS Domain Name option to Subnet2

Answer: A

QUESTION 148
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2.
Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?

A.    From Windows PowerShell on Server2, run Enable-PSRemoting cmdlet.
B.    From Windows PowerShell on Server1, run Install-WindowsFeature.
C.    From Windows Firewall with Advanced Security on Server2, create an inbound rule.
D.    From Internet Explorer on Server2, download and install Windows Management Framework 3.0.

Answer: B

QUESTION 149
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 is a DHCP server that is configured to have a scope named Scope1.
Server2 is configured to obtain an IP address automatically.
In Scope1, you create a reservation named Res_Server2 for Server2.
A technician replaces the network adapter on Server2.
You need to ensure that Server2 can obtain the same IP address.
What should you modify on Server1?

A.    The Advanced settings of Res_Server2
B.    The MAC address of Res Server2
C.    The Network Access Protection Settings of Scope1
D.    The Name Protection settings of Scope1

Answer: B

QUESTION 150
Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains the user accounts and the computer accounts for laptops and desktop computers. A Group Policy object (GPO) named GP1 is linked to OU1.
You need to ensure that the configuration settings in GP1 are applied only to the laptops in OU1. The solution must ensure that GP1 is applied automatically to new laptops that are added to OU1. What should you do?

A.    Modify the GPO Status of GP1.
B.    Configure the WMI Filter of GP1.
C.    Modify the security settings of GP1.
D.    Modify the security settings of OU1.

Answer: B

You can prepare for any certification of your choice with the ultimate preparation source that we have to offer!Are you thinking this can’t be true? Well, it is! Our Lead2pass software is now at your service to act as a guide in helping you pass 70-410. Now get that necessary competitive edge that comes with preparing with the help of Lead2pass software the fastest emerging IT certifications provider.

www.lead2pass.com/70-410.html